guideReturn To DenseiUSA Home PageLearn About DenseiUSADenseiUSA Bar Code Scanner ProductsCustomer SupportHow To Contact Us
DenseiUSA
Model BCH5535 Bar Code Reader


Features
  • High move tolerance
    Reads a bar code moving in vertical and/or horizontal directions at a relative speed of 10 inches per second. This allows faster and more accurate data entry.
  • High resolution
    Reads almost any bar code symbol, even labels on irregular and curved surfaces, thanks to its high resolution (5 mils) CCD imager.
  • Reads all standard codes
    Automatically discriminates and reads UPC/EAN, CODE39, CODABAR, Interleaved 2 of 5, CODE128 and CODE93 codes. It can also read UPC/EAN with 2- or 5-digit addendum.
  • Auto triggering
    Electronic sensing of the bar code label speeds operation and further reduces fatigue.
  • Compatible with wand scanners
    Wand emulation interface makes the scanner replace a wand scanner.
  • Reads poorly printed symbols
    Advanced circuitry and optics enable the scanner to read dirty or low contrast bar codes with PCS values as low as 0.3.
  • Double trigger switches
    Right side only, left side only, or both sides active.
  • Maintenance-free over a long life
    The totally solid-state design has no moving parts, allowing for stable operation without maintenance or adjustments.
  • Single voltage operation
    Operates on a single 5 volt (100 mA TYP.) power supply, allowing compatibility with the standard voltages available with the respective interfaces.
  • Multi-function selection via bar code menu
    It is easy to set the operating functions, including data transfer format, symbology, the number of digits and so on, using a bar code menu.


  Specifications
Series BCH5000
Model BCH5535
Code JAH1317
Output Wand emulation
Readable bar codes UPC/EAN, CODE39, CODABAR, Interleaved 2 of 5, CODE128 and CODE93
Selectable decoding functions: UPC/EAN with 2 or 5-digit addendum
Maximum Bar code width 3.3 in. (85 mm) (including 1 unit of space at each end)
Min. resolution 5 mils (0.125 mm)
Depth of field 0.8 in. (20 mm) TYP. (UPC/EAN standard labelx 1, PCS: 0.9)
Move tolerance 10 in./sec. at any angle of incidence
Light source Red LED (wavelength: 660nm)
Detecting element CCD imager
Min. PCS value 0.3 (white reflection: 85% or more)
Reading start method Auto or manual start selectable
Reading indicator Beeper and/or LED
Decoder Integrated into reading head
Voltage requirements 5 VDC +/- 1O%
Power consumption 100 mA TYP (max. 15 mA in portable mode)
Weight (without cable) 5.3 oz. (150 g)
Cable length 6.6 ft. (2 m)
Connector* 5 pin locking DIN
Max. external illumination 5000 lux TYP.
Operating temperature 32 deg. F to 104 deg. F (O deg. C to 40 deg. C)
Operating humidity 10% to 95% RH (non-condensing)
Drop durability Unit functions normally after 3.3 ft. (1 m) drop onto concrete surface
Noise standard FCC Class A (FCC Class B pending)

   External View Some of the Key Functions Selected via Bar Code Menu
External View
  • Output
    Signal level black bar: high or low
    Narrow bar width: 200 ms or 1 ms
  • Symbology Variables
    Bar code type, bar code length, etc.
  • Reading start method
    Auto or manual start
  • Beeper Control
    On/Off
    Volume: high/low
    Tone: high/low
  • Multiple bar code labels
    Up to 6 reads can be appended


Home | Corporate | Products | Support | Contact Us