guideReturn To DenseiUSA Home PageLearn About DenseiUSADenseiUSA Bar Code Scanner ProductsCustomer SupportHow To Contact Us
DenseiUSA
Model BCH5533/5536/5537
Bar Code Reader


Features
  • High move tolerance
    Reads a bar code moving in vertical and/or horizontal directions at a relative speed of 10 inches per second. This allows faster and more accurate data entry.
  • High resolution
    Reads almost any bar code symbol, even labels on irregular and curved surfaces, thanks to its high resolution (5 mils) CCD imager.
  • Reads all standard codes
    Automatically discriminates and reads UPC/EAN, CODE39, CODABAR, Interleaved 2 of 5 ,CODE128 and CODE93 codes. It can also read UPC/EAN with 2- or 5-digit addendum and multiple bar codes.
  • Auto triggering
    Electronic sensing of the bar code label speeds operation and further reduces fatigue.
  • Reads poorly printed symbols
    Advanced circuitry and optics enable the scanner to read dirty or low contrast bar codes with PCS values as low as 0.3.
  • Double trigger switches
    Right side only, left side only, or both sides active.
  • Maintenance-free over a long life
    The totally solid-state design has no moving parts, allowing for stable operation without maintenance or adjustments.
  • Single voltage operation
    Operates on a single 5 volt or 12 volt power supply, allowing compatibility with the standard voltages available with the respective interfaces.
  • Multi-function selection via bar code menu
    It is easy to set the operating functions, including data transfer format, symbology, the number of digits and so on, using a bar code menu.


  Specifications
Series BCH5000
Model BCH5533 BCH5536 BCH5537
Code JAH1313 JAH1318 JAH1319
Output OCIA
S, F or SP Format		 Port 5B/RS-485 Port 9B/RS-485
Readable bar codes UPC/EAN, CODE39, CODABAR (BCH5533 only), Interleaved 2 of 5, CODE128 and CODE93 (BCH5533 only) Selectable decoding functions: UPC/EAN with 2- or 5-digit addendum
Maximum Bar code width 3.3 in. (85 mm) (including 1 unit of space at each end)
Min. resolution 5 mils (0.125 mm)
Depth of field 0.8 in. (20 mm) TYP. (UPC/EAN standard labelx1, PCS: 0.9)
Move tolerance 10 in./sec. at any angle of incidence
Light source Red LED (wavelength: 660nm)
Detecting element CCD imager
Min. PCS value 0.3 (white reflection: 85% or more)
Reading start method Auto or manual start selectable
Reading indicator Beeper and/or LED
Decoder Integrated into reading head
Power requirements 5VDC +/- 10% 12VDC +/- 10%
Power consumption 100 mA TYP (max. 15 mA in portable mode) 150 mA TYP (max. 50 mA
in portable mode)		 75 mA TYP (max. 25 mA
in portable mode)
Weight (without cable) 5.3 oz. (150 g)
Cable length 6.6 ft. (2 m)
Connector* DIN 8 pin (male) Modular 8p Modular 4p
Max. external illumination 5000 lux TYP.
Operating temperature 32 deg. F to 104 deg. F (O deg. C to 40 deg. C)
Operating humidity 10% to 95% RH (non-condensing)
Drop durability Unit functions normally after 3.3 ft. (1 m) drop onto concrete surface
Noise standard FCC Class A (FCC Class B pending)

   External View Some of the Key Functions Selected via Bar Code Menu
External View
  • Output
    OCIA output format S, F, or SP Format
  • Symbology Variables
    Bar code type, bar code length, etc.
  • Reading start method
    Auto or manual start
  • Beeper Control
    On/Off
    Volume: high/low
    Tone: high/low
  • Multiple bar code labels
    Up to 6 reads can be appended


Home | Corporate | Products | Support | Contact Us